3Com 5500G-EI Command Reference Guide - Page 95
Description, Example, poe enable, Syntax, Parameter, poe legacy enable - software
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
PoE Configuration Commands 95 Description Use the display poe powersupply command to view the parameters of the power sourcing equipment (PSE). Example Display the PSE parameters. [SW5500]display poe powersupply PSE ID :1 PSE Legacy Detection :disable PSE Total Power Consumption :12000 mW PSE Available Power :268000 mW PSE Peak Value :12000 mW PSE Average Value :12000 mW PSE Software Version :290 PSE Hardware Version :000 PSE CPLD Version :021 PSE Power-Management mode :auto poe enable Syntax poe enable undo poe enable View Ethernet Port View Parameter None Description Use the poe enable command to enable the PoE feature on a port. Use the undo poe enable command to disable the PoE feature on a port. By default, the PoE feature on each port is enabled. Example Enable the PoE feature on the current port. [SW5500-GigabitEthernet1/0/3]poe enable Port power supply is enabled # Disable the PoE feature on the current port. [SW5500-GigabitEthernet1/0/3]undo poe enable Port power supply is disabled poe legacy enable Syntax poe legacy enable undo poe legacy enable