3Com 5500G-EI Command Reference Guide - Page 371

AAA Configuration Commands 371 You can use either the scheme or radius-scheme command to specify the RADIUS scheme for an ISP domain. If both of these two commands are used, the latest configuration will take effect. Related command: radius scheme. Example To specify the current ISP domain, 3Com163.net, to use the RADIUS scheme 3Com, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]domain marlboro.net [SW5500-isp-marlboro.net]scheme radius-scheme 3Com self-service-url Syntax self-service-url enable url-string self-service-url disable View ISP Domain View Parameter url-string: The URL address of the page used to change the user password on the self-service server, a string with 1 to 64 characters. This string cannot contain "?" character. If "?" is contained in the URL address, you must replace it with "|" when inputting the URL address in the command line. Description Use the self-service-url enable command to configure self-service server URL. Use the self-service-url disable command to remove the configuration. By default, self-service server URL is not configured on the Switch. This command must be incorporated with a RADIUS server (such as a CAMS server) that supports self-service. Self-service means that users can manage their accounts and card numbers by themselves. And a server with the self-service software is called a self-service server. Once this function is enabled on the Switch, users can locate the self-service server and perform self-management through the following operations: ■ Select "Change user password" on the 802.1x client. ■ After the client opens the default explorer (IE or NetScape), locate the specified URL page used to change the user password on the self-service server. ■ Change user password on this page. The "Change user password" option is available only after the user passed the authentication; otherwise, this option is in grey and unavailable.