3Com 5500G-EI Command Reference Guide - Page 467

Log Commands 467 [SW5500]info-center snmp channel 6 info-center source Syntax info-center source { modu-name | default } channel { channel-number | channel-name } [ debug { level severity | state state }* | log { level severity | state state }* | trap { level severity | state state } ] * undo info-center source { modu-name | default } channel { channel-number | channel-name } View System view Parameter modu-name: Module name. default: All the modules. log: Log information. trap: Trap information. debugging: Debugging information. level: Level. severity: Information level, do not output information below this level. By default, the log information level is warnings, the trap information level is debugging, the debugging information level is debugging. Information at different levels is as follows: emergencies: Level 1 information, which cannot be used by the system. alerts: Level 2 information, to be reacted immediately. critical: Level 3 information, critical information. errors: Level 4 information, error information. warnings: level 5 information, warning information. notifications: Level 6 information, showed normally and important. informational: Level 7 information, notice to be recorded. debugging: Level 8 information, generated during the debugging progress. If you only specify the level for one or two of the three types of information, the level(s) of the unspecified type(s) return to the default. For example, if you only define the level of the log information, then the levels of the trap and debugging information return to the defaults. channel-number: Channel number to be set.