3Com 5500G-EI Command Reference Guide - Page 156

156 CHAPTER 6: USING ROUTING PROTOCOL COMMANDS Parameter None Description Use the display ip routing-table verbose command to display the verbose routing table information. The information displayed includes the route state, the verbose description of each route and the statistics of the entire routing table. All current routes, including inactive routes and invalid routes, are displayed. Example To display the verbose routing table information, enter the following: display ip routing-table verbose The information displays in the following format: Routing Tables: Generate Default: no + = Active Route, - = Last Active, # = Both * = Next hop in use Destinations: 3 Routes: 3 Holddown: 0 Delete: 62 Hidden: 0 **Destination: 1.1.1.0 Mask: 255.255.255.0 Protocol: #DIRECT Preference: 0 *NextHop: 1.1.1.1 Interface: 1.1.1.1(Vlan-interface1) State: Age: 20:17:41 Cost: 0/0 **Destination: 1.1.1.1 Mask: 255.255.255.255 Protocol: #DIRECT Preference: 0 *NextHop: 127.0.0.1 Interface: 127.0.0.1(InLoopBack0) State: Age: 20:17:42 Cost: 0/0 **Destination: 2.2.2.0 Mask: 255.255.255.0 Protocol: #DIRECT Preference: 0 *NextHop: 2.2.2.1 Interface: 2.2.2.1(Vlan-interface2) State: Age: 20:08:05 Cost: 0/0 The meaning of route state is defined in Table 18. Other generated information is described in Table 21. Table 21 Output Description of the display ip routing-table verbose Command Descriptor Holddown Delete Meaning The number of holddown routes. This refers to a route advertising policy that some distance vector routing protocols (such as RIP) use to avoid expansion of error routes and to improve the transmission speed and accuracy of unreachable routes. It usually advertises a static route at an interval, regardless of the changes to dynamic routes to the same destination. For details, see the specific routing protocol. The number of deleted routes.