3Com 5500G-EI Command Reference Guide - Page 188

188 CHAPTER 6: USING ROUTING PROTOCOL COMMANDS Example To display OSPF summary information, enter the following: display ospf brief OSPF Process 1 with Router ID 10.110.95.189 OSPF Protocol Information The information displays in the following format: RouterID: 10.110.95.189 Border Router: AS spf-schedule-interval: 5 Routing preference: Inter/Intra: 10 External: 150 Default ASE parameters: Metric: 1 Tag: 0.0.0.1 Type: 2 SPF computation count: 16 Area Count: 1 Nssa Area Count: 0 Area 0.0.0.0: Authtype: none Flags: SPF scheduled: Interface: 201.1.1.4 (Vlan-interface1) Cost: 1 State: DR Type: Broadcast Priority: 1 Designated Router: 201.1.1.4 Backup Designated Router: 201.1.1.3 Timers: Hello 10, Dead 40, Poll 0, Retransmit 5, Transmit Delay 1 Table 27 Output Description of the display ospf brief Command Field Description RouterID Router ID of the router Border Router Border routers for connection to the area, including autonomous system border router (ASBR) and area border router (ABR). spf-schedule-interval Interval of SPF schedule. Authtype Authentication type of OSPF. Routing preference Routing preference of OSPF. The internal route of OSPF includes intra/inter area route, and its default routing preference is 10. While that of the external route of OSPF is 150 by default. Default ASE parameters Default ASE parameters of OSPF, including metric, type, and tag. SPF computation count SPF computation count since OSPF is enabled. Area Count Areas connected to this router. Nssa Area Count Number of NSSA areas. SPF scheduled SPF scheduled (flag). Interface IP address of the interface. Cost Cost of the interface. State State information Type OSPF network type of interface Priority Priority of interface Designated Router IP address of designated router Backup Designated IP address of backup designated router Router