3Com 5500G-EI Command Reference Guide - Page 293
display qos-interface, traffic-limit, Syntax, Parameter, Description, Example, display, qos-
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 293 highlights
QoS Configuration Commands List 293 Inbound: Matches: Acl 2000 rule 1 running Mirrored to: monitor interface display qos-interface traffic-limit Syntax display qos-interface { interface-name | interface-type interface-num | unit-id } traffic-limit View All views Parameter interface-name | interface-type interface-num:: Specifices an Interface of the Switch, for more information, refer to the port command in this manual. unit-id: Unit ID of the Switch. Description Use the display qos-interface traffic-limit command to view the traffic limit settings. If you set the port parameters, the configuration information about the specified port will be displayed. The information displayed includes the ACL of the traffic to be limited, the limited average rate and the settings of some related policing action. Related commands: traffic-limit. Example Display the traffic limit settings. display qos-interface gigabitethernet1/0/1 traffic-limit GigabitEthernet1/0/1: traffic-limit Inbound: Matches: Acl 2000 rule running Target rate: 128 Kbps display qos-interface traffic-priority Syntax display qos-interface { interface-name | interface-type interface-num | unit-id } traffic-priority View All views Parameter interface-name | interface-type interface-num:: Specifies an interface of the Switch, for a detailed description, refer to the port command in this manual. unit-id: Unit ID of the Switch. Description Use the display qos-interface traffic-priority command to view the traffic priority settings.