3Com 5500G-EI Command Reference Guide - Page 415
the name of the configuration file. It is a character string of 5 to 56
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 415 highlights
Configuration File Management Commands 415 Parameter None Description Use the reset saved-configuration command to erase configuration files from the flash memory of the Switch. Consult with technical support personnel before executing this command. Generally, this command is used in the following situations: ■ After upgrade of software, configuration files in flash memory may not match the new version's software. Perform reset saved-configuration command to erase the old configuration files. ■ When a Switch 5500G-EI is reused on a network but in a different manner to previously, the original configuration file should be erased and the switch reconfigured. If the configuration files do not exist in the flash memory when the Switch is powered on and initialized, it will choose the default setting. Related commands: save, display current-configuration, display saved-configuration. Example Erase the configuration files from the flash memory of the Switch. reset saved-configuration This will delete the configuration in the flash memory. The switch configurations will be erased to reconfigure. Are you sure?[Y/N] save Syntax save [ filename | safely ] View Any view Parameter file-name: the name of the configuration file. It is a character string of 5 to 56 characters. safely: save the configuration file in safely mode. Description Use the save command, to save the current configuration files to flash memory. After finishing a group of configurations and achieving corresponding functions, get the current configuration files stored in the flash memory. After a fabric is formed, if you execute the save command, all of the switches in the fabric save the current configuration to the configuration files.