3Com 5500G-EI Command Reference Guide - Page 29

Logging in Commands 29 Table 4 Output Description of the display user-interface summary Command Field 1 total UIs in use UI's name Description The total number of user interfaces in use User interface name display users Syntax display users [ all ] View All views Parameter all: Enter to display information on all user interfaces. Description Use the display users command to view information on the current user interface. Use the display users all command to view the information on all user interfaces. Example To display information on the current user interface, enter the following [SW5500]display users The information displays in the following format: UI F 0 AUX 0 Delay Type 00:00:00 IPaddress Username Userlevel 3 The categories of information displayed are as follows: Table 5 Output description of the display users command Field F UI Delay Type IPaddress Username Userlevel Description Indicates that the user interface is in use and is working in asynchronous mode Number of the first list is the absolute number of user interface. Number of the second list is the relative number of user interface Indicates the interval from the latest input until now, in seconds. Indicates the user interface type. Displays initial connection location, namely the host IP address of the incoming connection. Display the login name of the user who is using this interface Display the level of the user using this user interface free user-interface Syntax free user-interface { type | number } View User view