3Com 5500G-EI Command Reference Guide - Page 271
Example, display pim rp-info, Syntax, Parameter, Description, specified
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 271 highlights
PIM Configuration Commands 271 Example View the contents of the PIM multicast routing table on the router. display pim routing-table PIMSM Routing Table Total 0 (*,*,RP), 0 (*,G), 2 (S,G) (192.168.1.2, 224.2.178.130), Protocol 0x20: PIMSM, Flag 0x4: SPT UpTime: 23:59, Timeout after 196 seconds Upstream interface: VLAN-interface2, RPF neighbor: NULL Downstream interface list: NULL (192.168.1.2, 224.2.181.90), Protocol 0x20: PIMSM, Flag 0x4: SPT UpTime: 23:59, Timeout after 196 seconds Upstream interface: VLAN-interface2, RPF neighbor: NULL Downstream interface list: NULL Total 2 entries listed Table 49 Output description about PIM routing table Field RP (S,G) PIM-SM SPT RPF Description Rendezvous Point Source address, multicast group PIM Sparse Mode Shortest Path Tree Reverse Path Forwarding display pim rp-info Syntax display pim rp-info [ group-address ] View All Views Parameter group-address: Specify the group address to be showed. If no multicast group is specified, the RP information about all multicast groups will be displayed. Description Use the display pim rp-info to view the RP information of multicast group. In addition, this command can also show the BSR and static RP information. Example display pim rp-info PIM-SM RP-SET information: BSR is: 192.168.1.1 Group/MaskLen: 224.0.0.0/4 RP 192.168.1.1, Version 2 priority: 0 uptime(from last update): 29:11, to expire in: 2:02