3Com 5500G-EI Command Reference Guide - Page 484
Parameter, Description, Example, snmp-agent sys-info, Syntax, all SNMP version includes SNMP V1
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 484 highlights
484 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS undo snmp-agent packet max-size View System view Parameter byte-count: Specify the size of SNMP packet (measured in bytes), ranging from 484 to 17940; the default size is 1500 bytes. Description Use the snmp-agent packet max-size command to configure the size of SNMP packet that the Agent can send/receive. Use the undo snmp-agent packet max-size command to restore the default size of SNMP packet. The sizes of the SNMP packets received/sent by the Agent are different in different network environments. Example Set the size of SNMP packet to 1042 bytes. system-view System View: return to User View with Ctrl+Z. [SW5500]snmp-agent packet max-size 1042 snmp-agent sys-info Syntax snmp-agent sys-info { contact sysContact | location sysLocation | version { { v1 | v2c | v3 } * | all } } undo snmp-agent sys-info [ { contact | location }* | version { { v1 | v2c | v3 }* | all } ] View System view Parameter sysContact: Specify a character string describing the system maintenance contact (in bytes), with a length ranging from 1 to 255. The default contact information is "3Com Marlborough USA". sysLocation: Specify a character string to describe the system location. By default, the character string is "Marlborough USA". version: version of running SNMP. v1: SNMP V1. v2c: SNMP V2C. v3: SNMP V3. all: all SNMP version (includes SNMP V1, SNMP V2C, SNMP V3).