3Com 5500G-EI Command Reference Guide - Page 207
ospf cost, Syntax, Parameter, Description, Example, ospf dr-priority - 5500 ei
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
OSPF Configuration Commands 207 [SW5500-ospf-1]area 1 [SW5500-ospf-1-area-0.0.0.1]network 131.119.0.0 0.0.255.255 [SW5500-ospf-1-area-0.0.0.1]authentication-mode md5 [SW5500-ospf-1-area-0.0.0.1]quit [SW5500-ospf-1]quit [SW5500]interface vlan-interface 1 [SW5500-Vlan-interface1]ospf authentication-mode md5 15 3Com ospf cost Syntax ospf cost value undo ospf cost View VLAN Interface view Parameter value Enter the cost for running the OSPF protocol, in the range 1 to 65535. Description Using the ospf cost command, you can configure the cost of sending traffic from each interface. Using the undo ospf cost command, you can restore the default costs. For the Switch 5500-EI, the default cost for running OSPF protocol of on a VLAN interface is 10. Example To specify a cost of 33 when the interface vlan-interface 1 runs OSPF, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]interface vlan-interface 1 [SW5500-Vlan-interface1]ospf cost 33 ospf dr-priority Syntax ospf dr-priority value undo ospf dr-priority View VLAN Interface view Parameter value Enter the interface priority for electing the "designated router", ranging from 0 to 255. The default value is 1.