3Com 5500G-EI Command Reference Guide - Page 439
Example, display power, Syntax, Parameter, Description, display schedule reboot
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 439 highlights
Device Management Commands 439 Example To display the current memory status, enter the following: display memory The information displays in the following format: System Total Memory(bytes): 32491008 Total Used Memory(bytes): 13181348 Used Rate: 40% Table 55 Display information Field System Total Memory (bytes) Total Used Memory (bytes) Used Rate Description The Total Memory of switch, unit in byte The Total used Memory of switch, unit in byte The memory used rate display power Syntax display power [ unit unit-id ][ power-ID ] View All views Parameter unit unit-id: Specify the Unit ID of the switch power-ID: Power ID. Description Use the display power command to display the working state of the built-in power supply. Example Show power state. display power 1 Unit1 Power 1 State: Normal display schedule reboot Syntax display schedule reboot View Any view Parameter None Description Use the display schedule reboot command to check the configuration of related parameters of the switch schedule reboot terminal service.