3Com 5500G-EI Command Reference Guide - Page 284
Example, display packet-filter, Syntax, Parameter, Description, display time-range
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 284 highlights
284 CHAPTER 8: USING QOS/ACL COMMANDS Example Display the content of all the ACLs. display acl all Basic acl 2000, 0 rule,match-order is auto Acl's step is 1 Advanced ACL 3000, 1 rule Acl's step is 1 rule 1 permit ip (0 times matched) display packet-filter Syntax display packet-filter { interface { interface-name | interface-type interface-num } | unitid unit-id } View Any View Parameter interface { interface-name | interface-type interface-num }: Interface of the Switch, for more detail, please refer to the port command in this manual. unitid unit-id: Unit ID. If user inputs this parameter, all the packet-filtering information of the specified unit will be displayed. Description Use the display packet-filter command to view the information of the activated of ACL. The displayed content includes ACL number, subitem name and activation status. Example To display the information of the activated ACL of all interfaces, enter the following: display packet-filter unitid 1 display time-range Syntax display time-range { all | name } View Any View Parameter all: Displays all the time-range name: Specifies the name of the time range. This is a character string that starts with the letter (a-z or A-Z), ranging from 1 to 32 characters Description Use the display time-range command to view the configuration and status of the current time range. You will see the active or inactive state outputs respectively.