3Com 5500G-EI Command Reference Guide - Page 83

VLAN Configuration Commands 83 undo port interface_list View VLAN view Parameter interface_list: list of Ethernet ports to be added to or deleted from a certain VLAN, expressed as interface_list= {{ interface_type interface_num | interface_name } [ to { interface_type interface_num | interface_name } ] }&. interface_type is the interface type, interface_num is the interface number and interface_name is the interface name. For their meanings and value range, see the parameter of Port in this document. The interface number after keyword to must be larger than or equal to the port number before to. &: Represents the repeatable times of parameters, 1 is the minimal and 10 is the maximal. Description Using the port command, you can add one port or one group of ports to a VLAN. Using the undo port command, you can cancel one port or one group of ports from a VLAN. You can add/delete trunk port and hybrid ports to/from a VLAN by port and undo port commands in Ethernet Port View, but not in VLAN View. For the related command, see display vlan. Example Add Ethernet1/0/2 through Ethernet1/0/4 to VLAN 2. system-view System View: return to User View with Ctrl+Z. [SW5500]vlan2 [SW5500-vlan2]port ethernet1/0/2 to ethernet1/0/4 shutdown Syntax shutdown undo shutdown View VLAN Interface View Parameter None Description Use the shutdown command to disable the VLAN interface. Use the undo shutdown command to enable the VLAN interface.