3Com 5500G-EI Command Reference Guide - Page 448

448 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS debugging Syntax debugging module-name [ debugging-option ] undo debugging { all | module-name [ debugging-option ] } View User view Parameter all: Disable all the debugging. module-name: Specify the module name. debugging-option: Debugging option. Description Use the debugging command to enable the system debugging. Use the undo debugging command to disable the system debugging. By default, all the debugging processes are disabled. The Switch provides various kinds of debugging functions for technical support personnel and experienced maintenance staff to troubleshoot the network. Enabling the debugging will generate a large amount of debugging information and decrease the system efficiency. If the the debugging all command is used, it will adversely affect the operational performance of the network. Use the undo debugging all command to disable all debugging. For the related commands, see display debugging. Example Enable IP Packet debugging. debugging ip packet IP packet debugging switch is on. display Syntax diagnostic-information display diagnostic-information View All views Parameter None Description Use the display diagnostic-information command to view the configuration information on all currently running modules. This information helps you to monitor and troubleshoot your Switch 5500G-EI.