3Com 5500G-EI Command Reference Guide - Page 226
if-match cost, Syntax, Parameter, Description, Example, if-match interface
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
226 CHAPTER 6: USING ROUTING PROTOCOL COMMANDS if-match cost Syntax if-match cost value undo if-match cost View Route Policy view Parameter value Specify the required route metric value, ranging from 0 to 4294967295. Description Use the if-match cost command to configure one of the match rules of route-policy to match the cost of the routing information. Use the undo if-match cost command to cancel the configuration of the match rule. By default, no match sub-statement is defined. Related commands: if-match interface, if-match acl, if-match ip-prefix, if-match ip next-hop, if-match tag, route-policy, apply ip next-hop, apply local-preference, apply cost, apply origin and apply tag. Example A match sub-statement is defined, which allows the routing information with routing cost 8 to pass this match sub-statement. system-view System View: return to User View with Ctrl+Z. [SW5500]route-policy permit node 1 % New sequence of this list [SW5500-route-policy]if-match cost 8 if-match interface Syntax if-match interface { interface_name | interface_type interface_number } undo if-match interface View Route Policy view Parameter interface_type Enter interface type. interface_number Enter interface number. interface_name Enter interface name. Description Use the if-match interface command to match the route whose next hop is the designated interface.