3Com 5500G-EI Command Reference Guide - Page 67
speed, Syntax, Parameter, Description, Example, unicast-suppression
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Ethernet Port Configuration Commands 67 speed Syntax For a 100 Mbps Ethernet port, the parameters for this command are as follows: speed { 10 | 100 | auto } For a 1000 Mbps Ethernet port, the parameters for this command are as follows: speed { 10 | 100 | 1000 | auto } For a 10000 Mbps Ethernet port, the parameters for this command are as follows: speed { 10 | 100 | 1000 | 10000 | auto } The undo form of this command is: undo speed View Ethernet Port View Parameter 10: Enter to set the port speed to 10 Mbps. 100: Enter to set the port speed to 100 Mbps. 1000: Enter to set the port speed to 1000 Mbps. 10000:Enter to set the port speed to 10000 Mbps. auto: Enter to set the port speed to auto-negotiation. Description Use the speed command to configure the port speed. Use the undo speed command to restore the default speed. By default, the speed is auto. Related command: duplex. Example To configure the port speed of port Ethernet1/0/1 to 10 Mbps, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]interface Gigabitethernet 1/0/1 [SW5500-GigabitEthernet1/0/1]speed 1000 unicast-suppression Syntax unicast-suppression { ratio | pps pps } undo unicast-suppression View Ethernet Port View