3Com 5500G-EI Command Reference Guide - Page 163
filter-policy export, Syntax, Parameters, Description, Example - open
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
RIP Configuration Commands 163 filter-policy export Syntax filter-policy { acl_number | gateway gateway-ip | ip-prefix ip_prefix_name | route-policy route-policy-name } export [routing_process] undo filter-policy { acl_number | gateway gateway-ip | ip-prefix ip_prefix-name | route-policy route-policy-name } export [routing_process] View RIP view Parameters acl_number Enter the number of the ACL that you want to use to filter the destination addresses of the routing information. gateway-ip ip_prefix_name Enter the name of the address prefix list that you want to use to filter the destination addresses of the routing information. route-policy-name: Route policy name that filters routing information. After enabling RIP protocol, you can determine which routes are to be sent/received based on acl/cost/interface/ip/ip-prefix/tag fields. routing_protocol Enter the routing protocol whose routing information is to be filtered. This can be one of the following: ■ direct - Specifies direct routes ■ ospf - Specifies Open Shortest Path First (OSPF). ■ ospf-ase - Specifies OSPF external routes. ■ ospf-nssa - Specifies OSPF NSSA external routes. ■ static - Specifies static routes. Description Use the filter-policy export command to configure RIP to filter the advertised routing information. Use the undo filter-policy export command to configure RIP not to filter the advertised routing information. This is the default. Related commands: acl, filter-policy import, ip ip-prefix. Example To filter the advertised route information using ACL 2000, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]rip [SW5500-rip]filter-policy 2000 export