3Com 5500G-EI Command Reference Guide - Page 356
mac-authentication, Syntax, Parameter, specifies a single Ethernet
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 356 highlights
356 CHAPTER 11: USING AAA AND RADIUS COMMANDS Table 52 Description of MAC address authentication configuration information Field mac address authentication is Enabled offline detect period quiet period server response timeout value max allowed user number current user number amounts current domain Silent Mac User info GigabitEthernet1/0/1 is link-up MAC address authentication is Enabled Authenticate success: 0, failed: 0 Authenticate state Description The MAC address authentication feature is enabled on the switch Offline-detect timer, set the time interval for the Switch to detect whether the user is offline. By default, it is 300 seconds. Quiet timer. A period of quiet time that the Switch needed after failing to authenticate the user. Server timeout timer, set the timeout period to the connection between the Switch to the RADIUS server. The maximum number of users allowed by the Switch. Current user number. Current domain, by default, it is null. The silent user information. If a user does not pass the MAC address authentication, the Switch sets this user to be silent, in this period of time, the Switch does not authenticate this user. Interface GigabitEthernet1/0/1 link is in the up state. MAC address authentication is enabled on interface GigabitEthernet1/0/1 The statistics of the MAC address authentication on the interface, including the number of users passing the authentication and the number of users failing the authentication. There are four states of the online users: ■ Connecting: the user is connecting ■ Success: the user has passed the authentication ■ Failure: the user has failed the authentication ■ Logoff: the user is offline. mac-authentication Syntax mac-authentication [ interface interface-list ] undo mac-authentication [ interface interface-list ] View Ethernet Port View Parameter interface interface-list: Ethernet interface list including several Ethernet interfaces, expressed in the format interface-list = { interface-num [ to interface-num ] } & < 1-10 >. interface-num specifies a single Ethernet interface in the format interface-num = { interface-type interface-num | interface-name }, where interface-type specifies the interface type, interface-num specifies the interface number and interface-name specifies the interface name. For the respective meanings and value ranges, see the parameters in the Port Command chapter.