3Com 5500G-EI Command Reference Guide - Page 183
default type, Syntax, Parameters, Description, Example, default-cost, OSPF Area view
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
OSPF Configuration Commands 183 [SW5500]router id 1.1.1.1 [SW5500]ospf [SW5500-ospf-1]default tag 10 default type Syntax default type { 1 | 2 } undo default type View OSPF view Parameters 1 Enter to set the default to external routes of type 1. 2 Enter to set the default to external routes of type 2. Description Use the default type command to configure the default type when OSPF redistributes external routes. Use the undo default type command to restore the default type. By default, external routes are imported as type 2. OSPF requires a default type when redistributing a route found by other routing protocols. Related command: default tag. Example To specify the default type as type 1 when OSPF imports an external route, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]router id 1.1.1.1 [SW5500]ospf [SW5500-ospf-1]default type 1 default-cost Syntax default-cost value undo default-cost View OSPF Area view Parameter value Enter the cost value of the default route transmitted by OSPF to a Stub or NSSA area, in the range 0 to 16777214. The default value is 1.