3Com 5500G-EI Command Reference Guide - Page 313

Logon user's ACL Control Command 313 Parameter read: Indicates that this community name has the read-only right within the specified view. write: Indicates that this community name has the read-write right within the specified view. community-name: Character string of the community name. mib-view: Set the MIB view name which can be accessed by the community name. view-name: MIB view name. acl acl-number: The number identifier of basic number-based ACLs, ranging from 2000 to 2999 Description Using the snmp-agent community command, you can set the community access name, permit the access to the Switch using SNMP, and reference the ACL to perform ACL control to the network management users by acl-number. Using the undo snmp-agent community command, you can remove the setting of community access name. By default, SNMPV1 and SNMPV2C use community name to perform access. Example Set the community name as "MyCompany", permit the user to perform read-only access by using this community name, and reference the ACL 2000 to perform ACL control to the network management users (basic ACL 2000 has already been defined ). system-view System View: return to User View with Ctrl+Z [SW5500]snmp-agent community read MyCompany acl 2000 snmp-agent group Syntax snmp-agent group { v1 | v2c } group-name [ read-view read-view ] [ write-view write-view ] [ notify-view notify-view ] [acl acl-number] undo snmp-agent group { v1 | v2c } group-name snmp-agent group v3 group-name [ authentication | privacy ] [ read-view read-view ] [ write-view write-view ] [ notify-view notify-view ] [ acl acl-number ] undo snmp-agent group v3 group-name [ authentication | privacy ] View System View Parameter v1: V1 security mode.