3Com 5500G-EI Command Reference Guide - Page 228
if-match tag, Syntax, Parameter, Description, Example, ip ip-prefix
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
228 CHAPTER 6: USING ROUTING PROTOCOL COMMANDS [SW5500]route-policy permit node 1 % New sequence of this list [SW5500-route-policy]if-match ip next-hop ip-prefix p1 if-match tag Syntax if-match tag value undo if-match tag View Route Policy view Parameter value Enter the value in tag field of OSPF route information. Description Use the if-match tag command to match the tag field of OSPF route information. Use the undo if-match tag command to cancel the existing matching rules. Related commands: if-match interface, if-match acl, if-match ip-prefix, if-match ip next-hop, if-match cost, route-policy, apply ip next-hop, apply cost, apply local-preference, apply origin and apply tag. Example Define one match sub-statement and enable the OSPF route information whose value of tag is 8 to pass the match sub-statement. system-view System View: return to User View with Ctrl+Z. [SW5500]route-policy permit node 1 % New sequence of this list [SW5500-route-policy]if-match tag 8 ip ip-prefix Syntax ip ip-prefix ip_prefix_name [ index index_number ] { permit | deny } network len [ greater-equal greater_equal | less-equal less_equal ] undo ip ip-prefix ip_prefix_name [ index index_number | permit | deny ] View System View Parameter ip_prefix_name Enter the specified address prefix list name. It identifies one address prefix list uniquely. index_number Identify an item in the prefix address list. The item with smaller index-number will be tested first.