3Com 5500G-EI Command Reference Guide - Page 98
Parameter, Description, poe priority, Syntax
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
98 CHAPTER 4: USING POWER OVER ETHERNET (POE) COMMANDS View System View Parameter auto: Adopt the auto mode, a PoE management mode based on port priority. manual: Adopt the manual mode. Description Use the poe power-management command to configure the PoE management mode of port used in the case of power overloading. Use the undo poe power-management command to restore the default mode. By default, the PoE management mode on port is auto. Example Configure the PoE management mode on port to auto. [SW5500]poe power-management auto Auto Power Management is enabled Restore the default management mode. [SW5500]undo poe power-management Auto Power Management is enabled poe priority Syntax poe priority { critical | high | low } undo poe priority View Ethernet Port View Parameter critical: Set the port priority to critical. high: Set the port priority to high. low: Set the port priority to low. Description Use the poe priority command to configure the power supply priority on a port. Use the undo poe priority command to restore the default priority. By default, the port priority is low.