3Com 5500G-EI Command Reference Guide - Page 255
Example, igmp host-join, Syntax, Parameter, Description, igmp host-join port
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 255 highlights
IGMP Configuration Commands 255 Example Configure that only the hosts contained in the access-list 2000 connected to the port GigabitEthernet1/0/1 in VLAN-interface10 can be added to the multicast group, which is configured to use IGMP version 2. system-view System View: return to User View with Ctrl+Z. [SW5500]interface GigabitEthernet 1/0/1 [SW5500-GigabitEthernet1/0/1]igmp group-policy 2000 vlan 10 igmp host-join Syntax igmp host-join group-address undo igmp host-join group-address View LoopBack interface view Parameter group-address: Multicast address of the multicast group that an interface will join. Description Using igmp host-join command, you can enable a LoopBack interface of an ethernet switch to join a multicast group. Using undo igmp host-join command, you can disable the configuration. By default, a LoopBack interface does not join any multicast group. For the related command, see igmp host-join port, igmp host-join vlan and igmp group-policy. Example Add LoopBack 0 to the multicast group at 225.0.0.1. system-view System View: return to User View with Ctrl+Z. [SW5500]interface LoopBack 0 [SW5500-LoopBack0]igmp host-join 225.0.0.1 igmp host-join port Syntax igmp host-join group-address port { interface_type interface_ num | interface_name } [ to { interface_type interface_ num | interface_name } ] undo igmp host-join group-address port { interface_type interface_ num | interface_name } [ to { interface_type interface_ num | interface_name } ] View VLAN Interface View