3Com 5500G-EI Command Reference Guide - Page 76
Description, Example, link-aggregation group, agg-id mode, Syntax, Parameter - configuration manual
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
76 CHAPTER 2: USING PORT COMMANDS alname: Aggregation group name, character string with 1 to 32 characters. Description Use the link-aggregation group agg_id description command to configure descriptor for an aggregation group. Use the undo link-aggregation group agg-id description command to delete aggregation group descriptor. Related command: display link-aggregation verbose. Example To configure myal1 as the descriptor of aggregation group 22, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]link-aggregation group 22 description myal1 [SW5500] link-aggregation group Syntax agg-id mode link-aggregation group agg_id mode { manual | static } undo link-aggregation group agg_id View System View Parameter agg_id: Aggregation group ID, in the range of 1 to 464. manual: Manual aggregation group. static: Static aggregation group. Description Use the link-aggregation group agg_id mode command to create a manual or static aggregation group. Use the undo link-aggregation group command to delete an aggregation group. A manual or static aggregation group can have up to eight ports. You can use the link-aggregation group agg-id mode command to change an existing dynamic aggregation group into a manual or static one. If the port number in a group exceeds eight, this operation fails and the system prompts you about the configuration failure. Related command: display link-aggregation summary. Example To create manual aggregation group 22, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]link-aggregation group 22 mode manual