3Com 5500G-EI Command Reference Guide - Page 498
Description, Example, rmon history, Syntax, Parameter, owner
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 498 highlights
498 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS owner rmon-station: Name of the network management station that creates this entry. The length of the character string ranges from 1 to 127. Description Use the rmon event command to add an entry to the event table. Use the undo rmon event command to delete an entry from this table. Event management of RMON defines the way to deal with event number and event-log, send trap message or log while sending trap message. In this way, alarm events may obtain corresponding treatment Example Add the entry 10 to the event table and mark it as log event. system-view System View: return to User View with Ctrl+Z. [SW5500]rmon event 10 log rmon history Syntax rmon history entry-number buckets number interval sampling-interval [ owner text-string ] undo rmon history entry-number View Ethernet port view Parameter entry-number: Number of the entry to be added/deleted, ranging from 1 to 65535. buckets number: Capacity of the history table corresponding to the control line. interval sampling-interval: Sampling interval, ranging from 5 to 3600 (measured in seconds). owner text-string: Creator of the line. Length of the character string ranges from 1 to127. Description Use the rmon history command to add an entry to the history control table. Use the undo rmon history command to delete an entry from history control table. Perform this command to sample, set sample parameter (sample time interval) and storage amounts for a port. RMON will periodically perform data collection and save for query on this port. Sample information includes utility, error number and total packet number. Example Delete the entry 15 from the history control table. system-view System View: return to User View with Ctrl+Z. [SW5500]interface GigabitEthernet1/0/1