3Com 5500G-EI Command Reference Guide - Page 43
Parameter, Description, Example, system-view, Syntax, telnet, the prompt in user view will
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Logging in Commands 43 undo sysname View System view Parameter text: Enter the host name of the Switch. The host name must be no more than 30 characters long. The default is SW5500. Description Use the sysname command to configure the host name of the Switch. Use the undo sysname command to restore the host name to the default of SW5500. Changing the hostname of the Ethernet switch will affect the prompt of command line interface. For example, if the hostname of the Ethernet switch is MyHost, the prompt in user view will be . Example To configure the hostname of the Switch to 3Com, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]sysname 3Com [3Com] system-view Syntax system-view View User view Parameter None Description Enter system-view to enter the system view from the user view. Related commands: quit, return. Example To enter system view from user view, enter the following: system-view System view: return to User View with Ctrl+Z. [SW5500] telnet Syntax telnet { hostname | ip_address } [ service_port ] View User view