3Com 5500G-EI Command Reference Guide - Page 513
SSH Configuration, Commands, debugging ssh server, Syntax, Parameter, Description, Example - ntp
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 513 highlights
SSH Configuration Commands 513 System View: return to User View with Ctrl+Z. [SW5500]ntp-service unicast-server 128.108.22.44 version 3 SSH Configuration Commands This section describes the SSH configuration commands available on your Switch 5500G-EI. debugging ssh server Syntax debugging ssh server { all | vty index } undo debugging ssh server { all | vty index } View User view Parameter all: All SSH channels index: Debugged SSH channels. Optional values depend on the VTY number and they are 0~4. Description Use the debugging ssh server command to send the negotiation process defined in SSH1.5 protocol to the information center as debugging information and debug a single user interface. Use the undo debugging ssh server command to disable debugging function. By default, debugging function is disabled. Related commands: ssh server authentication-retries, ssh server rekey-interval, ssh server timeout. Example To print debugging information in running SSH, enter the following: debugging ssh server vty 0 00:23:20: SSH0: starting SSH control process 00:23:20: SSH0: sent protocol version id SSH-1.5-SW5500-1.25 00:23:20: SSH0: protocol version id is - SSH-1.5-1.2.26 00:23:20: SSH0: SSH_SMSG_PUBLIC_KEY msg 00:23:21: SSH0: SSH_CMSG_SESSION_KEY msg - length 112, type 0x03 00:23:21: SSH: RSA decrypt started 00:23:21: SSH: RSA decrypt finished 00:23:21: SSH: RSA decrypt started 00:23:21: SSH: RSA decrypt finished display rsa local-key-pair Syntax public display rsa local-key-pair public View All views