3Com 5500G-EI Command Reference Guide - Page 187

OSPF Configuration Commands 187 If you do not specify an IP address and subnet mask, the summary information of all OSPF imported routes is displayed. Related command: asbr-summary. Example To display the summary information of all OSPF imported routes, enter the following: display ospf asbr-summary OSPF Process 1 with Router ID 1.1.1.1 Summary Addresses Total summary address count: 2 Summary Address net : 168.10.0.0 mask : 255.254.0.0 tag : 1 status : Advertise The Count of Route is 0 Summary Address net : 1.1.0.0 mask : 255.255.0.0 tag : 100 status : DoNotAdvertise The Count of Route is 0 Table 26 Output Description of the display ospf abr-asbr summary Command Field net Mask tag status Description Destination network segment IP subnet mask Tag Status information including two values: ■ DoNotAdvertise - The summary routing information to the network segment will not be advertised. ■ Advertise - The summary routing information to the network segment will be advertised. display ospf brief Syntax display ospf [ process-id ] brief View All Views Parameter process-id Enter the process ID of OSPF, ranging from 1 to 65535. The command is applied to all current OSPF processes if you do not specify a process ID. Description Use the display ospf brief command to view OSPF summary information.