3Com 5500G-EI Command Reference Guide - Page 474

474 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS Description Use the terminal trapping command to enable terminal trap information display. Use the undo terminal trapping command to disable this function. By default, this function is enabled. Example Enable trap information display. terminal trapping SNMP Configuration Commands This section displays the Simple Network Management Protocol (SNMP) commands available on your Switch 5500G-EI. display snmp-agent Syntax display snmp-agent { local-engineid | remote-engineid } View All views Parameter local-engineid: local engine ID. remote-engineid: remote engine ID. Description Use the display snmp-agent engineid command to view the engine ID of current device. SNMP engine is the core of SNMP entity. It performs the function of sending, receiving and authenticating SNMP message, extracting PDU, packet encapsulation and the communication with SNMP application, etc. Example Display the engine ID of current device. display snmp-agent engineid Local SNMP engineID: 00000009020000000C025808 display snmp-agent Syntax community display snmp-agent community [ read | write ] View All views Parameter read: display read-only community information. write: display read-write community information.