3Com 5500G-EI Command Reference Guide - Page 344

344 CHAPTER 11: USING AAA AND RADIUS COMMANDS Configuration: Transmit Period 30 s, Handshake Period 15 s Quiet Period 60 s, Quiet Period Timer is disabled Supp Timeout 30 s, Server Timeout 100 s The maximum retransmitting time 2 Total maximum 802.1x user resource number is 1024 Total current used 802.1x resource number is 0 GigabitEthernet1/0/1 is link-up 802.1X protocol is disabled Proxy trap checker is disabled Proxy logoff checker is disabled The port is a(n) authenticator Authenticate Mode is auto Port Control Type is Mac-based Max on-line user number is 256 ... (Omitted) dot1x Syntax dot1x [ interface interface-list ] undo dot1x [ interface interface-list ] View Ethernet Port View Parameter interface interface-list: Ethernet port list including several Ethernet ports. interface-list = { interface-num [ to interface-num ] } & < 1-10 >. interface-num specifies a single Ethernet port in the format interface-num = { interface-type interface-num | interface-name }, where interface-type specifies the port type, interface-num specifies the port number and interface-name specifies the port name. For the respective meanings and value ranges, read the Parameter of the Port Configuration section. Description Use the dot1x command to enable 802.1x on the specified port or globally, (that is on the current device). Use the undo dot1x command to disable the 802.1x on the specified port or globally. By default, 802.1x is disabled on all the ports and globally on the device. This command is used to enable the 802.1x on the current device or on the specified port. When it is used in System View, if the parameter ports-list is not specified, 802.1x will be globally enabled. If the parameter ports-list is specified, 802.1x will be enabled on the specified port. When this command is used in Ethernet Port View, the parameter interface-list cannot be entered and 802.1x can only be enabled on the current port. The configuration command can be used to configure the global or port 802.1x performance parameters before or after 802.1x is enabled. Before 802.1x is