3Com 5500G-EI Command Reference Guide - Page 199
Example, display ospf routing, Syntax, Parameter, Description
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
OSPF Configuration Commands 199 Example To display information on the OSPF retransmission queue, enter the following: display ospf retrans-queue OSPF Process 200 with Router ID 103.160.1.1 The information displays in the following format: The Router's Neighbors is RouterID: 162.162.162.162 Address: 103.169.2.2 Interface: 103.169.2.5 Area: 0.0.0.1 Retrans list: Type: ASE LSID:129.11.77.0 AdvRouter:103.160.1.1 Type: ASE LSID:129.11.108.0 AdvRouter:103.160.1.1 display ospf routing Syntax display ospf [ process-id ] routing View All Views Parameter process-id: Enter process ID of OSPF, ranging from 1 to 65535. The command is applied to all current OSPF processes if you do not specify a process ID. Description Use the display ospf routing command to view the information about the OSPF routing table. Example To view information on the OSPF routing table, enter the following: display ospf routing OSPF Process 1 with Router ID 1.1.1.1 The information displays in the following format: Routing tables Routing for Network Destination Cost Type NextHop AdvRouter Area 10.110.0.0/16 1 Net 10.110.10.1 1.1.1.1 0 10.10.0.0/16 1 Stub 10.10.0.1 3.3.3.3 0 Total Nets: 2 Intra Area: 2 Inter Area: 0 ASE: 0 NSSA: 0