3Com 5500G-EI Command Reference Guide - Page 34
Example, Syntax, Parameter, Description, parity, User Interface View - com default password
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
34 CHAPTER 1: USING SYSTEM ACCESS COMMANDS Example To change the command line interface from English to Chinese, enter the following: language-mode chinese lock Syntax lock View User View Parameter None Description Use the lock command to lock the current user interface and prevent unauthorized users from accessing it. An authorized user must enter a valid password to access the interface. Example To lock the current user interface, enter the following: lock Password: xxxx Again: xxxx parity Syntax parity { even | mark | none | odd | space } undo parity View User Interface View Parameter even: Sets the Switch to even parity. mark: Sets the Switch to mark parity (1) none: Sets the Switch to perform no parity checking. odd: Sets the Switch to odd parity. space: Sets the Switch to zero parity (0) Description Use the parity command to configure the parity mode on the AUX (Console) port. Use the undo parity command to restore the default parity mode (no parity checking). This command can only be performed in the AUX user interface view.