3Com 5500G-EI Command Reference Guide - Page 476

476 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS display snmp-agent Syntax mib-view display snmp-agent mib-view [ exclude | include | viewname mib-view ] View All views Parameter exclude: Display the SNMP mib view excluded. include: Display the SNMP mib view included. viewname: Display the SNMP mib view according to the mib view name. mib-view: Specify the mib view name. Description The display snmp-agent mib-view command is used to view the MIB view configuration information of the Switch. Example Display the information about the currently configured MIB view. display snmp-agent mib-view View name:mv MIB Subtree:internet Storage-type: nonVolatile -included active View name:test MIB Subtree:internet Storage-type: nonVolatile -included active View name:ViewDefault MIB Subtree:internet Storage-type: nonVolatile -included active View name:ViewDefault MIB Subtree:snmpUsmMIB Storage-type: nonVolatile -excluded active View name:ViewDefault MIB Subtree:snmpVacmMIB Storage-type: nonVolatile -excluded active View name:ViewDefault MIB Subtree:snmpModules.18 Storage-type: nonVolatile -excluded active The following table describes the output fields. Table 59 Output description of the display snmp-agent mib-view command Field View name MIB Subtree storage-type included/excluded active Description View name MIB subtree Storage type Permit or forbid access to a MIB object Indicate the line state in the table If the SNMP Agent is disabled, "Snmp Agent disabled" will be displayed after you execute the above display commands.