3Com 5500G-EI Command Reference Guide - Page 453

HWPing Commands 453 Example Test the gateways passed by the packets to the destination host at 18.26.0.115. tracert 18.26.0.115 tracert to allspice.lcs.mit.edu (18.26.0.115), 30 hops max 1 helios.ee.lbl.gov (128.3.112.1) 0 ms 0 ms 0 ms 2 lilac-dmc.Berkeley.EDU (128.32.216.1) 19 ms 19 ms 19 ms 3 lilac-dmc.Berkeley.EDU (128.32.216.1) 39 ms 19 ms 19 ms 4 ccngw-ner-cc.Berkeley.EDU (128.32.136.23) 19 ms 39 ms 39 ms 5 ccn-nerif22.Berkeley.EDU (128.32.168.22) 20 ms 39 ms 39 ms 6 128.32.197.4 (128.32.197.4) 59 ms 119 ms 39 ms 7 131.119.2.5 (131.119.2.5) 59 ms 59 ms 39 ms 8 129.140.70.13 (129.140.70.13) 80 ms 79 ms 99 ms 9 129.140.71.6 (129.140.71.6) 139 ms 139 ms 159 ms 10 129.140.81.7 (129.140.81.7) 199 ms 180 ms 300 ms 11 129.140.72.17 (129.140.72.17) 300 ms 239 ms 239 ms 12 * * * 13 128.121.54.72 (128.121.54.72) 259 ms 499 ms 279 ms 14 * * * 15 * * * 16 * * * 17 * * * 18 ALLSPICE.LCS.MIT.EDU (18.26.0.115) 339 ms 279 ms 279 ms HWPing Commands This section displays the hwping options available on your Switch 5500G-EI. hwping-agent enable Syntax hwping-agent enable undo hwping-agent enable View System View Parameter None Description Use the hwping-agent enable command to enable the HWPing client function. Use the undo hwping-agent enable command to disable the HWPing client function. Before you can perfrom a test, you must enable the HWPing client function. Example Enable HWPing Client. [SW5500]hwping-agent enable hwping hwping administrator-name operation-tag undo hwping administrator-name operation-tag