3Com 5500G-EI Command Reference Guide - Page 485
Description, Example, snmp-agent target-host, Syntax, Parameter, Specifies SNMP version 2C.
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 485 highlights
SNMP Configuration Commands 485 Description Use the snmp-agent sys-info command to set system information such as geographical location of the device, contact information for system maintenance and version information of running SNMP. Use the undo snmp-agent sys-info location command to restore the default value. Example Set system location as Building 3/Room 214. system-view System View: return to User View with Ctrl+Z. [SW5500]snmp-agent sys-info location Building 3/Room 214 snmp-agent target-host Syntax snmp-agent target-host trap address udp-domain host-addr [ udp-port udp-port-number ] params securityname community-string [ v1 | v2c | v3 [ authentication | privacy ] ] undo snmp-agent target-host host-addr securityname community-string View System view Parameter trap: Specifies the host to receive traps or notifications address: Specifies the transport address to be used in the generation of SNMP messages. udp-domain: Specifies the transport domain over UDP for the target address. host-addr: Enter the IP address of the destination host. udp-port udp-port-number: Enter the UDP port number of the host to receive the SNMP notification. params: Specifies the SNMP target information to be used in the generation of SNMP messages. community-string: Enter the community name, up to 32 characters in length. v1: Specifies SNMP version 1. v2c: Specifies SNMP version 2C. v3: Specifies SNMP version 3. authentication: Specifies that the packet is authenticated without encryption. privacy: Specifies that the packet is authenticated and encrypted. Description Use the snmp-agent target-host command to select and configure the host that you want to receive SNMP notification.