3Com 5500G-EI Command Reference Guide - Page 529
Set Switch Startup Mode, Reboot, Boot Menu File, Download Commands, Selecting a TFTP download
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 529 highlights
Boot Menu 529 Are you sure to disable bootrom password recovery? Yes or No(Y/N) n If the bootrom super password is disabled and the bootrom password (set at Boot Menu Option 5) is lost, bootrom access is no longer possible. If access to the bootrom menu is required, the Switch will need to be returned to 3Com for repair. The super password is a fixed password that is based on the hardware of the Switch. Once the Switch has been registered with 3Com, this password can be supplied to the registered owner by contacting 3Com technical support. Set Switch Startup Mode Enter Option 9 at the prompt to allow the Power on Self Test (POST) mode to be selected. The following is displayed: The current mode is fast startup mode! Are you sure to change it to full startup mode? Yes or No(Y/N)n Full startup mode supplies additional POST information via the console. Reboot Enter Option 0 at the prompt to reboot the Switch. The following is displayed: Starting...... Boot Menu File Download Commands Enter Option 1 from the Boot menu to display the following download options: Selecting a TFTP download 1. Set TFTP protocol parameter 2. Set FTP protocol parameter 3. Set XMODEM protocol parameter 0. Return to boot menu Enter your choice(0-3): 1 Load File name :s4b03_01_04s168.app Switch IP address :10.1.1.200 Server IP address :10.1.1.177 Are you sure to download file to flash? Yes or No(Y/N) Attached TCP/IP interface to netdrv0. 0x83fbb6a0 (tNetTask): arp info overwritten for a147a5b2 by 00:0d:54:9a:fa:20 Attaching network interface lo0...done. Loading done Free flash Space: 10491904 bytes Writing flash done! Please input the file attribute (main/backup/none):none done!