3Com 5500G-EI Command Reference Guide - Page 480

480 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS Number of GetReq msgs sent :0 Number of GetNextReq msgs Received :0 Number of GetNextReq msgs sent :0 Number of GetResp msgs received :0 Number of GetResp msgs sent :0 Number of GetNextResp msgs received :0 Number of GetNextResp msgs sent :0 Number of SnmpMibSync msgs received :0 Number of SnmpMibSync msgs sent :0 Number of SnmpMibGetCntrReq msgs received :0 Number of SnmpMibGetCntrReq msgs sent :0 Number of SnmpMibGetCntrResp msgs received :0 Number of SnmpMibGetCntrResp msgs sent :0 enable snmp trap Syntax enable snmp trap updown undo enable snmp trap updown View Ethernet port view Parameter None. Description Use the enable snmp trap updown command to enable the current port to transmit the LINK UP and LINK DOWN trap information. Use the undo enable snmp trap updown command to disable the current port to transmit the LINK UP and LINK DOWN trap information. The command is not available for the Loopback interface, NULL interface and AUX interface. Example Enable the current port GigabitEthernet1/0/1 to transmit the LINK UP and LINK DOWN trap information. system-view System View: return to User View with Ctrl+Z. [SW5500]interface GigabitEthernet 1/0/1 [SW5500-GigabitEthernet1/0/1]enable snmp trap updown snmp-agent community Syntax snmp-agent community { read | write } community-name [ mib-view view-name ] [ acl acl-list ] ] undo snmp-agent community community-name