3Com 5500G-EI Command Reference Guide - Page 252

252 CHAPTER 7: USING MULTICAST PROTOCOL COMMANDS Example View the IGMP configuration and running information of all interfaces. display igmp interface Vlan-interface1 (10.153.17.99): IGMP is enabled Current IGMP version is 2 Value of query interval for IGMP(in seconds): 60 Value of other querier time out for IGMP(in seconds): 120 Value of maximum query response time for IGMP(in seconds): 10 Value of robust count for IGMP: 2 Value of startup query interval for IGMP(in seconds): 15 Value of last member query interval for IGMP(in seconds): 1 Value of query timeout for IGMP version 1(in seconds): 400 Policy to accept IGMP reports: none Querier for IGMP: 10.153.17.99 (this router) IGMP group limit is 1024 No IGMP group reported igmp enable Syntax igmp enable undo igmp enable View VLAN Interface View Parameter None Description Use the igmp enable command to enable IGMP on an interface. Use the undo igmp enable command to disable IGMP on the interface. By default, IGMP is disabled. The igmp enable command can be executed only if the multicast routing function is enabled. After multicast routing is enabled, you can initiate the IGMP feature configuration. Related command: multicast routing-enable Example Enable IGMP on Vlan-interface 10. system-view System View: return to User View with Ctrl+Z [SW5500]interface Vlan-interface 10 [SW5500-Vlan-interface10]igmp enable igmp group-limit Syntax igmp group-limit number