3Com 5500G-EI Command Reference Guide - Page 161
display rip interface, Syntax, Parameter, Description, Example
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
RIP Configuration Commands 161 Example To display the current running state and configuration information of RIP, enter the following: display rip RIP is running public net VPN-Instance Checkzero is on Default cost : 1 Summary is on Preference : 100 Traffic-share-across-interface is off Period update timer : 30 Timeout timer : 180 Garbage-collection timer : 120 No peer router Network : 202.38.168.0 Table 22 Output Description of the display rip Command Field RIP is running Checkzero is on Default cost:1 Summary is on Preference: 100 Period update timer : 30 Timeout timer : 180 Garbage-collection timer : 120 No peer router Network: 202.38.168.0 Description RIP is active Zero field checking is enabled The default route cost is 1 Routes are summarized automatically The preference of RIP is 100 The three RIP timers No destination address of a transmission is specified RIP enabled on network segment 202.38.168.0 display rip interface Syntax display rip interface View All views Parameter None Description Use the display rip interface command to view RIP interface information. Example To display rip interface information, enter the following: display rip interface RIP Interface: public net Address Interface Ver MetrIn/Out Input Output 1.0.0.1 Vlan-inteface1002 0/1 on on Split-horizon on