3Com 5500G-EI Command Reference Guide - Page 33
idle-timeout, Syntax, Parameter, Description, Example, language-mode
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Logging in Commands 33 system-view System View: return to User View with Ctrl+Z. [SW5500]user-interface aux 0 [SW5500-ui-aux0]history-command max-size 20 idle-timeout Syntax idle-timeout minutes [ seconds ] undo idle-timeout View User interface view Parameter minutes: Enter the number of minutes you want to allow a user interface to remain idle before it is disconnected. This can be in the range 0 to 35791. seconds: Enter the number of seconds in addition to the number of minutes. Optional. Description Use the idle-timeout command to configure the amount of time you want to allow a user interface to remain idle before it is disconnected. Use the undo idle-timeout command to restore the default idle-timeout. By default, idle-timeout is set to 10 minutes. To disable idle timeout, set the idle-timeout value to 0. Example To configure the timeout value to 1 minute on the AUX user interface, enter the following: system-view System View: return to User View with Ctrl+Z. [SW5500]user-interface aux 0 [SW5500-ui-aux0]idle-timeout 1 language-mode Syntax language-mode { chinese | english } View User View Parameter chinese: Sets the language of the command line interface to Chinese. english: Sets the language of the command line interface to English. Description Use the language-mode command to choose the language of the command line interface. By default, the command line interface is set to English.