3Com 5500G-EI Command Reference Guide - Page 446
Description, Example, display config-agent, Syntax, Parameter
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 446 highlights
446 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS Description Use the display clock command to obtain information about system data and time from the terminal display.. For the related commands, see clock. Example View the current system date and clock. display clock 15:50:45 UTC Mon 2001/2/12 display config-agent Syntax display config-agent unit-id unit-id View Any view Parameter unit-id: Unit ID of current switch, in the range of 1 to 8. Description Use the display config-agent unit-id command to view statistics of the configuration agent. Configuration agent is one of the XRN features. You can log into one switch of the fabric to configure and manage the fabric by the configuration agent. The functions of the configuration agent include; ■ Distributing configuration commands to the right destination switches or processing modules based on the resolution result of the commands input. ■ Sending output information of the commands from the switch you have logged into to your terminal. ■ Supporting simultaneous configuration of multiple users. You cannot configure the configuration agent, but can view the statistics of the configuration agent. Example To display statistics of the configuration agent on switch 1, enter the following: display config-agent unit-id 1 Config-agent info on Unit1 Successful Config message recv: 10 Config message send: 10 Notification message recv: 10 Notification message send: 10 Information message recv: 3 Information message send: 1 Failed on 0 0 0 0 0 0