3Com 5500G-EI Command Reference Guide - Page 456
Parameter, Description, Example, test-enable, Syntax, display hwping, HWPing tests include DHCP, FTP
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 456 highlights
456 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS Parameter test-type: Test type, which can be one of the following key words: ■ dhcp: DHCP test ■ ftp: FTP connection test ■ icmp-echo: ICMP test, the default test type ■ snmpquery: SNMP test ■ tcp-private: Tests the TCP connection of a specified unknown port ■ tcp-public: Tests the TCP connection of Port 7 ■ udp-private: Tests the UDP connection of a specified unknown port ■ udp-public: Tests the UDP connection of Port 7 Description Use the test-type command to configure the type of test. HWPing tests include DHCP, FTP, HTTP, ICMP, SNMP, TCP and UDP test. The default test type is ICMP. Example Set the test type to ICMP. [SW5500-administrator-icmp]test-type icmp-echo test-enable Syntax test-enable View HWPing Test Group View Parameter None Description Use the test-enable command to execute an HWPing test. After executing the test-enable command, the system will not display the test result. You may view the test result information by executing the display hwping command. For the related command, see display hwping. Example Excecute the HWPing test defined by the test group 'wgw-testicmp'. [SW5500-hwping-wgw-testicmp]test-enable display hwping Syntax display hwping { result | history } [ administrator-name operation-tag ]