3Com 5500G-EI Command Reference Guide - Page 30

30 CHAPTER 1: USING SYSTEM ACCESS COMMANDS Parameter type: Enter the type and type number of the user interface to be reset. number: Enter the index number of the user interface to be reset. Description Use this command to reset a specified user interface to its default settings. The user interface will be disconnected after the reset. Use free user-interface type to reset the interface with the specified type and type number to its default settings. Use free user-interface number to reset the interface with the specified index number to its default settings. You cannot use this command on the current user interface. Example To reset user interface AUX 1 from another user interface on the Switch , enter the following: free user-interface aux 1 After the command is executed, user interface AUX 1 is disconnected. When you next log in using user interface AUX 1, it opens using the default settings . header Syntax header { shell | incoming | login } text undo header { shell | incoming | login } View System view Parameter login: Login information in case of authentication. It is displayed before the user is prompted to enter user name and password. shell: User conversation established header, the information output after user conversation has been established. If authentication is required, it is prompted after the user passes authentication.. incoming: Login header, the information output after a Modem user logs in. If authentication is required, it is prompted after the user passes authentication. In this case, no shell information is output.. text: Specifies the title text. If you do not choose any keyword in the command, the system displays the login information by default. The system supports two types of input mode: you can input all the text in one line (a maximum of 256 characters, including command key word, can be entered); or you can input all the text in several lines using the key, and more than 256 characters can be entered. The text starts and ends with the first character. After entering the last character, press the key to exit the interactive process.