3Com 5500G-EI Command Reference Guide - Page 131
IP Performance, Configuration, Commands, display fib, Syntax, Parameter, Description, Example
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
IP Performance Configuration Commands 131 system-view System View: return to User View with Ctrl+Z. [SW5500]interface vlan-interface 1 [SW5500-Vlan-interface1]udp-helper server 192.1.1.2 IP Performance Configuration Commands This section describes the commands you can use to configure and manage the IP Performance Configuration operations on your Switch 5500G-EI. display fib Syntax display fib View Any view Parameter none Description Use the display fib command to view the summary of the forwarding information base. The information includes: destination address/mask length, next hop, current flag, timestamp and outbound interface. Example To display the summary of the Forwarding Information Base, enter the following: display fib Destination/Mask Nexthop 127.0.0.0/8 127.0.0.1 Flag TimeStamp U t[0] Interface InLoopBack0 Table 12 Description of the output information of the display fib command Field Flag Description The flag options include: B - Blackhole route D - Dynamic route G - Gateway route H - Local host route S - Static route U - Route in UP status R - Unreachable route L - Route generated by ARP or ESIS display fib ip_address Syntax display fib ip_address1 [ { mask1 | mask-length1 } [ ip_address2 { mask2 | mask-length2 } | longer ] | longer ] View Any view