3Com 5500G-EI Command Reference Guide - Page 359

AAA Configuration Commands 359 AAA Configuration Commands This section describes how to use the AAA configuration commands on your Switch 5500G-EI. access-limit Syntax access-limit { disable | enable max-user-number } View ISP Domain View Parameter disable: No limit to the supplicant number in the current ISP domain. enable max-user-number: Specifies the maximum supplicant number in the current ISP domain, ranging from 1 to 1048 Description Use the access-limit command to configure a limit to the amount of supplicants in the current ISP domain. By default, there is no limit to the amount of supplicants in the current ISP domain. This command limits the amount of supplicants contained in the current ISP domain. The supplicants may contend with each other for the network resources. So setting a suitable limit to the amount will guarantee the reliable performance for the existing supplicants. Example Sets a limit of 500 supplicants for the ISP domain, marlboro.net. system-view System View: return to User View with Ctrl+Z. [SW5500]domain marlboro.net New domain added. [SW5500-isp-marlboro.net]access-limit enable 500 attribute Syntax attribute { ip ip-address | mac mac-address | idle-cut second | access-limit max-user-number | vlan vlanid | location { nas-ip ip-address port portnum | port portnum } undo attribute {ip | mac | idle-cut | access-limit | vlan | location } View Local User View Parameter idle-cut second: Allows/disallows the local users to enable the idle-cut function. (The specific data for this function depends on the configuration of the ISP domain where the users are located.) The argument minute defines the idle-cut time, which is in the range of 60 to 7200 seconds.