3Com 5500G-EI Command Reference Guide - Page 277
Description, Example, reset pim routing-table, Syntax, Parameter
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 277 highlights
PIM Configuration Commands 277 neighbor-address: Specifies neighbor address. interface interface-type interface-number: Specifies interface. Description Use the reset pim neighbor command to clear a PIM neighbor. Related command: display pim neighbor Example Clear the PIM neighbor 25.5.4.3. reset pim neighbor 25.5.4.3 reset pim routing-table Syntax reset pim routing-table { all | { group-address [ mask { group-mask | group-mask-length }] | source-address [ mask { source-mask | source-mask-length }] | { incoming-interface { interface-type interface-number | null } } } * } View User View Parameter all: All PIM neighbors group-address: Specifies group address. mask group-mask: Specifies group mask. mask-length group-mask-length: Specifies mask length of the group address. source-address: Specifies source address. mask source-mask: Specifies source mask. mask-length source-mask-length: Specifies mask length of the group address. incoming-interface: Specifies incoming interface for the route entry in PIM routing table. interface-type interface-number: Specifies the interface. null: Specifies the incoming interface of the route entry as null. Description Use the reset pim routing-table command to clear a PIM route entry. You can type in source-address first and group-address after in the command, as long as they are valid. Error information will be given if you type in invalid addresses. If in this command, the group-address is 224.0.0.0/24 and source-address is the RP address (where group address can have a mask, but the resulted IP address