3Com 5500G-EI Command Reference Guide - Page 153

Routing Table Display Commands 153 Vlinkindex: 0 State: Age: 3:23:44 Cost: 0/0 Tag: 0 For detailed information of the output information, refer to Table 18. display ip routing-table Syntax protocol display ip routing-table protocol protocol [ inactive | verbose ] View All views Parameters protocol Enter one of the following: ■ direct Displays the direct connection route information ■ static Displays the static route information. ■ ospf Displays OSPF route information. ■ ospf-ase Displays OSPF ASE route information. ■ ospf-nssa Displays OSPF NSSA route information. ■ rip Displays RIP route information. inactive Enter to display inactive route information. Without this parameter, the command displays both active and inactive route information. Optional. verbose Enter to display verbose route information. Without this parameter, the command displays the route summary. Optional. Description Use the display ip routing-table protocol command to view the route information for a specified protocol. Example To display a summary of all direct connection routes, enter the following: display ip routing-table protocol direct The information displays in the following format: DIRECT Routing tables: Summary count: 4 DIRECT Routing tables status:: Summary count: 3 Destination/Mask Protocol Pre Cost Nexthop 20.1.1.1/32 DIRECT 0 0 127.0.0.1 127.0.0.0/8 DIRECT 0 0 127.0.0.1 127.0.0.1/32 DIRECT 0 0 127.0.0.1 DIRECT Routing tables status:: Summary count: 1 Destination/Mask Protocol Pre Cost Nexthop 210.0.0.1/32 DIRECT 0 0 127.0.0.1 Interface InLoopBack0 InLoopBack0 InLoopBack0 Interface InLoopBack0