3Com 5500G-EI Command Reference Guide - Page 503

NTP Configuration Commands 503 actual frequency: 100.0000 Hz clock precision: 2^17 clock offset: 0.0000 ms root delay: 0.00 ms root dispersion: 0.00 ms peer dispersion: 0.00 ms reference time: 00:00:00.000 UTC Jan 1 1900(00000000.00000000) The following table describes the outputs: Table 68 NTP service status information Output clock status:unsynchronized clock stratum: 16 reference clock ID nominal frequency actual frequency clock precision clock offset root delay root dispersion peer dispersion reference time Meaning Local clock status: do not synchronize to any remote NTP server. Indicates the NTP stratum of local clock Indicates the address of a remote server of the reference ID, in the case that the local system has been synchronized by a remote NTP server or the ID of some clock source. Nominal frequency of the local system hardware clock. Actual frequency of the local system hardware clock. Precision of local system clock Offsets of the local clock to the NTP server clock. Root delay from local equipment to the master reference clock. Dispersion of the local clock relative to the NTP server clock. Dispersion of the remote NTP server. Reference timestamp. display ntp-service trace Syntax display ntp-service trace Views All views Parameter None. Description Use the display ntp-service trace command to display the brief information about every NTP server on the way from the local equipment to the reference clock source. This command will be ineffective when the switches form an XRN network. Example display ntp-service trace The information displays in the following format: