3Com 5500G-EI Command Reference Guide - Page 463
Parameter, Description, Example, info-center logbuffer, Syntax
UPC - 662705493534
View all 3Com 5500G-EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 463 highlights
Log Commands 463 View System view Parameter None Description Use the info-center enable command to enable the system log function. Use the undo info-center enable command to disable system log function. By default, system log function is enabled. Only after the system log function is enabled can the system output the log information to the info-center loghost and console, etc. For the related commands, see info-center loghost, info-center logbuffer, info-center console channel, info-center monitor channel, display info-center. Example Enable the system log function. system-view System View: return to User View with Ctrl+Z. [SW5500]info-center enable info-center logbuffer Syntax info-center logbuffer [ channel { channel-number | channel-name } | size buffersize ] undo info-center logbuffer [ channel | size ] View System view Parameter channel: Configure the channel to output information to buffer. channel-number: Channel number, ranging from 0 to 9, that is, system has ten channels. channel-name: Specify the channel name. The name can be channel6, channel7, channel8, channel9, console, logbuffer, loghost, monitor, snmpagent, trapbuffer. size: Configure the size of buffer. buffersize: Size of buffer (number of messages which can be kept); The default size of the buffer is 512.